Manual Cream Profi Whip
Discover the
world of iSi:
Visit the iSi website and learn
more about our extensive range of
products: Our comprehensive collection of recipes from simply yummy to
creatively sophisticated combinations
offers you access to the entire culinary
world of iSi. Let yourself be inspired!
The iSi website provides detailed
product information about all iSi
Whippers/Siphons and iSi Accessories.
The detailed online instructions
provide information about first-time
use, cleaning, and troubleshooting
iSi Whippers and Siphons.
If you have any further questions please
contact info@isi.com
For the US: isinorthamerica@isi.com
Guaranteed quality:
Every iSi Whipper and Siphon is thoroughly
inspected before leaving the factory. iSi
offers a two-year warranty for materials and
machining, as long as faults are not determined
to be the result of improper use. The warranty is
effective from the date on the purchase receipt.
Register online now and we will extend your
warranty!
Enjoy the benefits of a three-year warranty for
materials and machining.
The warranty is only valid when original whipper
parts from iSi are used, as given in the list of
product components. The perfect function of
your Whipper/Siphon can only be guaranteed
if you exclusively use iSi chargers with it. No
warranty or liability claim will be upheld for
faults, damage, or consequential damage
particularly determined to be the result of
non-compliance and/or ignorance of the user
instructions and the safety information therein.
FOR U.S. ONLY:
Limited warranty, Limitations and Warning:
iSi products are thoroughly tested before they
leave the factory, and iSi warrants for a period
of two years that its products are free from defects in materials and workmanship and, if used
only with other iSi products, will function as
intended. iSi’s liability in the event of a product’s
failure to meet this warranty is limited to repair
or replacement of the product or, at iSi’s option
or if iSi is unable to deliver a replacement product, to refund the purchase price. In no event,
however, shall iSi be liable for incidental or
consequential damages. Any implied warranties
are limited to the terms of the express warranties, including the two-year duration. iSi cream
whipping systems, bottles and chargers are
designed and engineered to function together
as a system and involve gas under pressure.
All iSi products and parts bear the iSi logo; iSi
recommends that only iSi parts and products
be used with iSi products, including that only iSi
chargers be used with iSi Whippers/Siphons and
that iSi chargers be used only in iSi Whippers/
Siphons. Failure to follow this recommendation
or any failure to follow the instructions for use
and care of the products invalidates this warranty and all implied warranties in their entirety
as to any consequences of such failure.
WARNING: In addition, failure to follow this
recommendation or any of the instructions for
use and care constitutes misuse of iSi products
and could result in malfunction of the system
and possible personal injury and/or property
damage. In the event of any personal injury,
you should promptly seek appropriate medical
attention.
Whipper Data.
Max. service pressure PS |
0.5 L / 1 US pint:
20 bar / 290 psi 1 L / 1 US quart: 30 bar / 435 psi |
Min. operating temperature | 1°C / 34°F |
Max. operating temperature | 30°C / 86°F |
Max. filling volume |
0.5 L / 1 US pint
1 L / 1 US quart |
Max. number of chargers to be used (N2O) |
1 iSi cream charger
(0.5 L / 1 US pint)
2 iSi cream chargers (1 L / 1 US quart) |
Usage | Approved for commercial use. For fresh, pure cream, and desserts. Suitable for cold preparations only. |
Material List.
Description | Material |
Bottle | Stainless steel |
Head | POM, silicone, stainless steel, nickel-plated brass, brass, PU, EPDM |
Head gasket | TPE |
Decorator tip | PP, stainless steel |
Charger holder | Stainless steel, silicone |
Dispensing piston | Stainless steel, POM, silicone |
Technical data is subject to change without
prior notice.
Safety Information.
Failure to follow this safety instructions or any
recommendation for use and care constitutes
misuse of iSi products and could result in malfunction of the system and possible personal
injury and/or property damage.
- Do not exceed minimum or maximum pressure, minimum or maximum temperature, maximum filling volume, number of chargers or usage of the iSi Whipper shown in the Whipper Data! Do not use for any purposes not indicated in these instructions!
- Please read the instructions for use carefully to avoid operating errors and keep a copy on hand!
- Do not use force when screwing on or off the head, using the whipper and during any operation described in these instructions!
- Store the iSi Whipper out of the reach of children!
- Never store or use the iSi Whipper outside of the min. and max. operating temperatures! Do not store in a freezer!
- Only charge a whipper that is filled!
- Cryogenic applications (with liquid nitrogen, for example) are not permitted!
- Only use a head and bottle of the same iSi Whipper model together
- Never combine iSi components with components from another brand or manufacturer!
- The head should always be screwed on straight and completely tight, never crooked or incompletely tightened!
- Only use original iSi cream chargers!
- When screwing on the charger, do so away from others and keep face away from the whipper; do not bend over the whipper!
- The whipper is a pressure equipment. If it is dropped or damaged (e.g., cracked or dented), do not use again because it poses a risk of injury! Please have the whipper checked by the iSi service center!
- Never unscrew the head when the whipper is pressurized!
- Never use the lever as a carrying handle!
- Proper cleaning is a mandatory requirement in order to avoid the whipper becoming blocked! Check that the iSi Whipper has been properly cleaned before use!
- Only dismantle the iSi Whipper for cleaning in accordance with the illustration!
- Before cleaning, check the material compatibility of the cleaning solution and disinfectant solution used!
- Do not make any modifications to the iSi Whipper! This will void the warranty and exempt the company from any liability!
- Never use more chargers than specified and never overfill the whipper! This will ensure that the specified maximum operating pressure is not exceeded!
- If the pressure will not release, please
contact iSi or your service center!
NOTE: Before using the iSi Whipper for the first
time, remove the transportation lock from the
piston thread. Carry out thorough cleaning as
shown in the Cleaning illustration.
NOTE: To avoid the formation of lumps, you
should completely dissolve powdered ingredients such as sugar, etc., in some liquid before
filling. Do not use any ingredients with fruit
pulp or seeds.
Instructions for Use
NOTE: Please observe the illustrations
“instructions for use”!
Cream/cream-based desserts should be cold
when filled. Dispense cream/cream-based
desserts from the whipper shortly before eating.
Preparation
1. Insert the head gasket into the head.
2. Insert dispensing piston into the head.
3. Screw the decorator tip onto the dispensing
piston, not too tight but enough to be secure.
4. Fill bottle with the prepared mixture.
NOTE: Please note the fill line and marking
on the bottom of the bottle. Do not overfill!
The remaining empty space is required for
optimal whipping results. Use a measuring
cup.
Equipment Setup
5. Screw the head onto the bottle so that it is
straight and tighten by hand.
6. Insert the original iSi cream charger into the
charger holder.
NOTE: Never screw on the charger when the
decorator tip is not attached to the dispensing piston.
7. Screw the charger holder with the inserted
charger onto the head until you can hear
that all of the charger contents have flowed
into the whipper.
WARNING: The whipper is now pressurized! |
8. Shake the whipper vigorously 6 times.
9. Unscrew the charger holder and recycle the
empty charger.
NOTE: A slight hissing noise may be heard
when removing the charger holder. This is
normal.
10.If using a 1 L iSi Whipper, repeat steps 6–9.
Cleaning.
Main Cleaning
NOTE: Please observe the illustrations on
cleaning!
1. Press the lever until the whipper is completely empty and there is no pressure left.
Remove the head from the bottle.
2. Unscrew the decorator tip. Hold on to the
dispensing piston on the plastic part on the
inside of the head. Then pull the dispensing
piston out of the head.
3. Remove the head gasket for basic cleaning.
4. Rinse product components by hand using
warm potable water along with a standard
cleaning agent and clean the dispensing
piston and decorator tip using the cleaning
brush. Completely remove any traces of fat
or egg white.
5. Then clean all individual parts in the dishwasher as needed.
NOTE: Do not use special cleaning agents for
stainless steel, scouring agents or abrasive
sponges/brushes.
NOTE: For mechanical or manual cleaning,
make sure that you use the correct amount
of cleaning solution or combined disinfectant
and cleaning solution. The exposure time and
the selected temperature will determine the
cleaning results.
Interim Cleaning
Clean the decorator tip at regular intervals (every 1–2 hours) during use. Remove the decorator
tip or rinse it with potable water direct on the
whipper.
Quick Cleaning
1. Press the lever until the whipper is completely empty and there is no pressure left.
Remove the head from the bottle.
2. Fill the whipper with 0.5 or 1 liter of warm
water, depending on the filling volume.
3. Set up the whipper with 1 iSi cream charger
according to “Equipment Setup” steps 5–9.
4. Press the lever as far as possible and
completely empty the iSi Whipper (hold
“headfirst”) until the whipper is free of
pressure.
5. Then carry out “Main Cleaning”.
NOTE: Quick cleaning should not be used as a
substitute for basic cleaning.
Disinfection
All product parts that come into contact with
the filling liquid can be cleaned as usual and
then disinfected. The applicable instructions
regarding the use of standard cleaning agents
and disinfectants must be observed.
Storage.
If the iSi Whipper is not going to be filled again
immediately, leave the components to air dry
in a clean place and store the iSi Whipper in a
dismantled condition. Never store the whipper
with the head screwed on!
NOTE: Observe the applicable food hygiene
regulations.
Troubleshooting.
Release the pressure
Place the whipper upright, place a towel over
the decorator tip and gently operate the lever
until the pressure is gone from the iSi Whipper.
Now the head can be removed from the bottle.
If the pressure will not release, please contact
iSi or your service center.
I cannot remove the content and/or the iSi
Whipper sprays.
1. There is a blockage due to undissolved
ingredients such as sugar.
- “Release the pressure” and then carry out “Basic Cleaning”.
- Make sure that powdered ingredients are dissolved completely.
2. The cream or cream-filled preparation has
become too stiff.
- Next time decrease the intensity and frequency of the shaking cycles.
- For information on the frequency of the shaking cycles, refer to www.isi.com/faq
3. Content is too firm due to over-cooling.
- Leave the whipper to stand at room temperature for around 5–10 minutes.
- Pay attention to the operating temperature of the iSi Whipper.
4. No pressure/not enough pressure in the
device.
- Only use original iSi cream chargers.
- Do not reuse empty chargers. They should be recycled.
- Only operate the whipper “headfirst” with a vertical decorator tip because otherwise there could be a loss of pressure.
- Pay attention to the maximum number of chargers to be used indicated in the Whipper Data.
- The head was not firmly screwed onto the bottle by hand until it was secure.
- The head gasket was not inserted. “Release the pressure” and then set-up again.
- The decorator tip was not screwed on. “Release the pressure” and then set-up again.
- The bottle neck has been damaged. “Release the pressure.” Send the whipper to iSi or to your service center.
5. Too many chargers were used.
- Pay attention to the maximum number of chargers to be used indicated in the Whipper Data.
- “Release the pressure” and then set-up again.
The content being dispensed is too runny.
1. The whipper was overfilled.
- “Release the pressure”, pour out the excess liquid and then set-up the whipper again.
- Observe the maximum filling amounts.
2. The whipper was not shaken or not shaken
enough.
- For information on the frequency of the shaking cycles, refer to www.isi.com/faq
3. The content is not cold enough.
- Place a filled and prepared iSi Whipper in the refrigerator for at least 1–2 hours.
- Keep a filled iSi Whipper cold between uses.
4. Too few chargers were used or an unsuitable
charger was used.
- Pay attention to the maximum number of chargers to be used indicated in the Whipper Data.
- Only use original iSi cream chargers.
The charger is difficult to screw on.
1. The charger being used is not suitable.
- Only use original iSi cream chargers.
The cream charger will not puncture.
1. The charger being used is not suitable.
- Only use original iSi cream chargers.
2. The charger was inserted backwards.
- Insert the charger correctly (see diagram: Instructions for use).
3. The puncturing unit has been damaged.
- Send the whipper to iSi or to a service center.
The decorator tip will not unscrew.
1. The decorator tip was attached too tightly.
- Screw on the decorator tip so that it is not too tight, but tight enough to be secure.
- “Release the pressure.” If the decorator tip still does not unscrew, contact iSi or a service center.
2. Interim cleaning has not been carried out
regularly.
- Interim cleaning needs to be carried out every 1–2 hours.
- Hold the bottle with the tip under potable water and clean the tip in warm running water.
During operation, gas is leaking through the
dispensing piston or decorator tip.
1. The device was used without an attached tip.
- Before screwing on the charger, make sure that the decorator tip is attached to the dispensing piston.
- “Release the pressure” and then set-up the whipper again.
2. The dispensing piston seal has been damaged.
- The dispensing piston needs to be replaced and is available as an original iSi spare part.
During operation, gas is leaking between the
bottle and the head.
1. The head gasket is missing.
- “Release the pressure” and insert the head gasket into the head.
2. The head gasket has been damaged.
- “Release the pressure.” The head gasket needs to be replaced and is available as an original iSi spare part.
3. The head was not tightened securely.
- Tighten the head onto the bottle by hand as per the instructions.
4. The bottle has been damaged on the upper
edge.
- “Release the pressure” and send the whipper to iSi or a service center.
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability
of replacement parts. In the U.S. replacement
parts are also available at www.isi-store.com.
Only send in the complete whipper for repairs.
Replacement parts can be seen in greater detail
on the expanded drawing.
Error. Slot type "moon-next-cms-manuals" could not be transformed.
TypeError: Cannot convert undefined or null to object